Blind
Active Member
- Joined
- December 14, 2004
- Messages
- 52
- Reaction score
- 0
- City, State
- Half Moon Bay, CA
I have located what appears to be the factory amp/tuner (has 2 grey plugs with many wires, and a radio antenna lead) in the drivers side rear panel.
The passenger side rear panel however doesn't have a sub in it from what I can see, it has a little cargo holder and a webbed net there.
The truck is a `96 XLT with 6 cd changer/cassette.
I have an MTX class D amp with line level inputs, and need to locate what wire pairs to use for the input from the factory amp in the rear panel.
does anyone have a diagram for this? I bought a chiltons manual today and the damn thing doesn't have any radio schematics at all.
btw - the wire colors going into the amp do not make sense, most factory decks (like in my mustang) have easily distinguished wire pairs for each speaker, with a red, yellow, and black for powering the stereo. whats up with this amp setup?
--short version--
I'm installing a seperate amp to power subs to the existing factory headunit and need to know where to get a line-level input.
The passenger side rear panel however doesn't have a sub in it from what I can see, it has a little cargo holder and a webbed net there.
The truck is a `96 XLT with 6 cd changer/cassette.
I have an MTX class D amp with line level inputs, and need to locate what wire pairs to use for the input from the factory amp in the rear panel.
does anyone have a diagram for this? I bought a chiltons manual today and the damn thing doesn't have any radio schematics at all.
btw - the wire colors going into the amp do not make sense, most factory decks (like in my mustang) have easily distinguished wire pairs for each speaker, with a red, yellow, and black for powering the stereo. whats up with this amp setup?
--short version--
I'm installing a seperate amp to power subs to the existing factory headunit and need to know where to get a line-level input.
