Wheels31522
New Member
- Joined
- March 15, 2022
- Messages
- 2
- Reaction score
- 1
- City, State
- Roanoke west Virginia
- Year, Model & Trim Level
- 1999 Mazda b3000
Hey all,
I'm replacing my steering knuckles and installing these seals. The stock ones appear to have seals on both sides of the hub and the ones I have are just 1 piece.
Should I drive these all the way in? The stock ones appear to be flush with the knuckle surface and there's about 1/4in between the seat and the underside of the seal.
Pics for reference
I'm replacing my steering knuckles and installing these seals. The stock ones appear to have seals on both sides of the hub and the ones I have are just 1 piece.
Should I drive these all the way in? The stock ones appear to be flush with the knuckle surface and there's about 1/4in between the seat and the underside of the seal.
Pics for reference