hawkk72
Member
- Joined
- June 3, 2008
- Messages
- 37
- Reaction score
- 0
- City, State
- Greensboro NC
- Year, Model & Trim Level
- 1999 Eddie Bauer
I have determined that my actuator has a problem with the board itself. The motor turns when I apply 5 volts directly to it but it will not work when seated in the circuit board and plugged into the harness. I checked with a meter and I have 5 volts so power at the plug doesn't appear to be the problem. I am going to order a replacement actuator but I need to be sure I get the correct one. My dash controls are all seperate buttons (heat, a/c, defrost, floor, etc) but there is also an automatic button. That would lead me to believe that I have ATC, not manual but in all the pics I can find online the manual actuator looks exactly like the one I have. The part number of my actuator is F87H-19E616-AB. Can anyone help identify the part and tell me if it is manual or ATC? I tried to do it on some of the parts sites but am drawing blanks.
In a sort of related question I am getting no air through my dash vents on any setting. Where exactly is the vacuum motor for the dash vents located? If it's behind the dash and hard to get to a procedure would be greatly appreciated! Thanks.
In a sort of related question I am getting no air through my dash vents on any setting. Where exactly is the vacuum motor for the dash vents located? If it's behind the dash and hard to get to a procedure would be greatly appreciated! Thanks.