2000 XLS foglight harness

ok i havea set of brand new foglights (round) for my 00 XLS i got for $50 new for both. and i want to get an HID kit for these as well as i have a set in my headlights ok so my expo didnt come with the foglights so i doubt ill have the pigtail because there isnt a switch inside so what im asking for is a picture of anysort of this plug/pigtail that s used to power the foglights. also if anyone has a picture of their H1 hid kit id like to see if i can use a normal switch and relay to turn these on because several pictures ive found of tis is a female socket type of connection i hope someone here can shed some light on this for me thanks in advance guys

 

[vroomzoomboom]

my truck didn't come with fog lights either, but the connector should be behind the radio bezel, you will just need a factory switch. as well, you should have the plugs for your fog lights behind the bumper near the air bag sensors. all you will need to do is get the wires that went from the plugs near the air bag sensors, and modify the wires going to your h.i.d. bulbs. that's what i did, and they work fine, and it all looks factory. i have some pictures of the fogs in my profile if you want to see what they look like.

 

[Bill Kemp]

Somewhere, someone has determined that 900? bulbs will fit in the fog lights instead of the H-1 bulb/holder in your lights. I dont remember the size bulb.
Seems if you can find out the 900? bulb that it would be easier to use that and get a plug at a parts store to hook up the ballasts.
Then all you would need to do is order the correct 900?(whatever) bulb HID kit for the fogs and connect it to a new harness.
Here is one using the H1 kit. http://www.explorerforum.com/forums/showthread.php?t=209015

Seems there is other info as well. Will try to find......

OK I found this: http://www.explorerforum.com/forums/showthread.php?t=212615
Seems like the 9006 will also fit in the fogs. You might want to go to a junk yard and pick up a free bulb to see for sure.

 

[chief_bignut]

Somewhere, someone has determined that 900? bulbs will fit in the fog lights instead of the H-1 bulb/holder in your lights. I dont remember the size bulb.
Seems if you can find out the 900? bulb that it would be easier to use that and get a plug at a parts store to hook up the ballasts.
Then all you would need to do is order the correct 900?(whatever) bulb HID kit for the fogs and connect it to a new harness.
Here is one using the H1 kit. http://www.explorerforum.com/forums/showthread.php?t=209015

Seems there is other info as well. Will try to find......

OK I found this: http://www.explorerforum.com/forums/showthread.php?t=212615
Seems like the 9006 will also fit in the fogs. You might want to go to a junk yard and pick up a free bulb to see for sure.

wow thanks i would have never thought of that props to you bro