03ExploKRV
Member
- Joined
- September 8, 2008
- Messages
- 44
- Reaction score
- 0
- Year, Model & Trim Level
- 2003 XLT V6
Noticed today that both rear inside pads were almost worn all the way down and appeared to be stuck against the rotors. I changed everything out and sanded and lubed all the contact points like I always do but am wondering why they stuck and were worn like they were. I doubt it's an actual caliper issue as they work perfectly.
Any ideas what I could do to prevent this?
many thanks in advance!
Any ideas what I could do to prevent this?
many thanks in advance!
