2011 explorer keyless entry pillar | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

2011 explorer keyless entry pillar

kennyf150lariat

New Member
Joined
June 15, 2013
Messages
5
Reaction score
0
City, State
naples , fl
Year, Model & Trim Level
11 explorer xlt
How to install a drivers door keyless entry pillar on a 2011 explorer ?
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Are you replacing it or do you think your going to add it?
 












Well on the 16 you first remove the lower window outside molding which has ONE screw at the edge of the door. Then its just carefully pry it out. I would do that with the window down. Then roll up the window and remove the inside door panel. Unplug keypad connector. To remove keypad, pry the keypad off (it is held on with double sided tape). Clean off all the old tape and clean surface thoroughly.

Then attach new keypad and install in reverse procedure.
 












Is there a way to add this to the base model?
 












Well on the 16 you first remove the lower window outside molding which has ONE screw at the edge of the door. Then its just carefully pry it out. I would do that with the window down. Then roll up the window and remove the inside door panel. Unplug keypad connector. To remove keypad, pry the keypad off (it is held on with double sided tape). Clean off all the old tape and clean surface thoroughly.

Then attach new keypad and install in reverse procedure.
Is the 2017 Ford Explorer the same way?
 












Back
Top