Mope
Member
- Joined
- January 8, 2019
- Messages
- 38
- Reaction score
- 14
- City, State
- Chicago, IL
- Year, Model & Trim Level
- 2016 Explorer Limited
Well, here's my introduction and what's probably a stupid question (or, at least, a problem of my own making).
Picked up a 2016 Explorer Limited with an impact to lower driver front end - the AC condenser and Radiator held, but were bent and the core support on that side was broken. I disassembled the front end, replaced both AC/Rad and got a new core support.
Everything went back together just fine until I came to plugging the driver side front bumper harness back into the main loom. I have a 4 prong/3 wire plug that I just cannot find a corresponding sensor/harness for. I'm attaching some pictures in the event that anyone can help (the bumper is enough of a *%)# to remove I don't want to move on until I resolve this!). This wiring group runs up to the hood switch, across to the fans, and down to ???.
Any thoughts would be appreciated!
Picked up a 2016 Explorer Limited with an impact to lower driver front end - the AC condenser and Radiator held, but were bent and the core support on that side was broken. I disassembled the front end, replaced both AC/Rad and got a new core support.
Everything went back together just fine until I came to plugging the driver side front bumper harness back into the main loom. I have a 4 prong/3 wire plug that I just cannot find a corresponding sensor/harness for. I'm attaching some pictures in the event that anyone can help (the bumper is enough of a *%)# to remove I don't want to move on until I resolve this!). This wiring group runs up to the hood switch, across to the fans, and down to ???.
Any thoughts would be appreciated!