emerica243
Member
- Joined
- July 14, 2018
- Messages
- 39
- Reaction score
- 12
- Year, Model & Trim Level
- 16 explorer xlt
I've been through countless threads here and still have not found a concrete answer on easiest firewall access from engine bay to cabin for a switch.
I've heard under drivers you have to drill your own hole. I've heard there's a gromet on passenger side but you have to remove glove box. And I've heard it's easiest to just b go through the door sill/fender. I've attached a photo of my driver's side footwell.
Can anyone point me in the direction of a entry point/gromet if there is one here? If not, what are the easiest methods.
I've heard under drivers you have to drill your own hole. I've heard there's a gromet on passenger side but you have to remove glove box. And I've heard it's easiest to just b go through the door sill/fender. I've attached a photo of my driver's side footwell.
Can anyone point me in the direction of a entry point/gromet if there is one here? If not, what are the easiest methods.