2024 Ranger XLT

[Fix4Dirt]

New rig came in! Specs: 2024 Ranger XLT 2.3 4x4 301A Adv. Tech & Tow FX4 Offroad

No real plans for the first while, eventually level and do 33s, toolbox, backrack, communications stuffs... keep it simple!

 

[Stic-o]

Congratulations

Looks great.

 

[Fix4Dirt]

Congratulations

Looks great.

Thank you!!!!!!! I'm super excited since it drives so nice! (far cry from his old truck) Super excited to see where this goes! (though likely it would be like Ranger Tremor meets work truck haha)

 

[Fix4Dirt]

Congratulations

Looks great.

Steve, do you think the swing out toolboxes for the '19-'23 will fit the '24? Would it be possible to get measurement from the tailgate to the wheel well? Ford lists different PNs for the gens, but just curious if theyre close enough that they could be used on the 24s

 

[Stic-o]

The beds are different for sure. You can actually fit a piece of plywood in between the wheel wells on the newer trucks. My '19 you can't

I can measure mine, but I have the factory drop in bed liner, so maybe off. Was the only way you could add the power point in the bed at the time.

 

[Fix4Dirt]

The beds are different for sure. You can actually fit a piece of plywood in between the wheel wells on the newer trucks. My '19 you can't

I can measure mine, but I have the factory drop in bed liner, so maybe off. Was the only way you could add the power point in the bed at the time.

Ahhhh got it, ok. Yeah, if you can- no rush! Im just wondrring if I could reasonably use a 19-23 swing out toolbox on the 24. Thanks!

Also shucks about the bed on the 5g! That woukd be a bit frustrating... since Im a plywood stacker haha

 

[Fix4Dirt]

The Explorer meeting it's younger (but bigger!) brother!

 

[Fix4Dirt]

Thinking about naming the Ranger "Snowball" thoughts? Since it's stock for now, and looks pretty like a snowball at the moment...

Already averages 18mpg on the 405 in peak traffic, and it's nowhere near broken in yet!

 

[Stic-o]

Thinking about naming the Ranger "Snowball" thoughts? Since it's stock for now, and looks pretty like a snowball at the moment...

Already averages 18mpg on the 405 in peak traffic, and it's nowhere near broken in yet!

Stock on the highway I use to get 25mpg in my Ranger. Now after 34's, leveled and the little air diffuser under the bumper removed, she'll get 20-21mpg. Now that is with the programer and running premium. Without the programer on Regular it's about 18.5mpg or so.

 

[Fix4Dirt]

Stock on the highway I use to get 25mpg in my Ranger. Now after 34's, leveled and the little air diffuser under the bumper removed, she'll get 20-21mpg. Now that is with the programer and running premium. Without the programer on Regular it's about 18.5mpg or so.

That sounds about right. I ran it in ECO on the 405 going down to Crenshaw (no traffic oddly in the morning) I got around 23 (not broken in yet I assume?) But in traffic coming home got 18... not half bad! Plans are to level and do 33s though, so Ill be prepared for that! (Although in the same conditions the Explorer gets about 13... so improvement! Though it's dads rig not mine haha I just borrowed it today to see how it drives)

 

[Stic-o]

Let me know when he's ready to level and I'll see if I can help out with a kit some. Very little out for these trucks so far.

 

[Fix4Dirt]

Let me know when he's ready to level and I'll see if I can help out with a kit some. Very little out for these trucks so far.

Thank you!!!!!! Thusfar Ive only come across RC, and theres a vague feeling in my mind NGR made one (NRG? NGR?) (The army green colored ones fwiw haha)

RC doesnt seem to have released a seperate lift for the 2024, so I wonder if a '19+ would fit....

 

[Fix4Dirt]

2.5 Inch Leveling Kit | Ford Ranger 2WD/4WD (2019-2024)

2.5 Inch Leveling Kit | Ford Ranger 2WD/4WD (2019-2024)

www.roughcountry.com

 

[Fix4Dirt]

How To: Add 2024 Ford Ranger Modular Bedliner

1. Open the box up, should look like this (minu the toolbox) & come with a bag of hardware 2. Wash your bed and dry it fully 3. Use T40 Torx to remove the 6 bed tiedowns (You don't have to remove the bed light and the power sockets, did it out of curiosity for what was behind) Note: These are in...

www.explorerforum.com

 

[1sicbronconut]

I'd wait a bit and put some Bilstein's or Fox shocks on it,they're a great upgrade IMHO and I've installed quite a few on F150's and Rangers.

 

[Fix4Dirt]

I'd wait a bit and put some Bilstein's or Fox shocks on it,they're a great upgrade IMHO and I've installed quite a few on F150's and Rangers.

Will keep this in mind! Though, this already rides super nice. Can't wait to get it dirty haha

 

[Fix4Dirt]

Premium Front Bumper with Bull Bar for Ford Ranger 2024+

*Due to the high demand, there's currently a lead time of 5-6 weeks from the time you place your order for this bumper. Unlike typical brush guards and bumpers, DD Offroad Premium Bumpers feature a meticulously engineered mounting system that entirely replaces the factory bumper. These bumpers...

ddoffroad.com

Found this, but they said not in stock until further notice. Hopefully things like this will come out in the future! Although I wonder about the radar sensor, which is tucked in the factory bumper.

 

[Stic-o]

I'd wait a bit and put some Bilstein's or Fox shocks on it,they're a great upgrade IMHO and I've installed quite a few on F150's and Rangers.

Bilstein is going to be awhile. They still don't even have anything for the newer Tundra. Fox will probably be soon. Icon is normally the quickest out of the gate.

 

[Fix4Dirt]

BEHIND THE GRILL LIGHT BAR BRACKET - NEXT GEN RANGER/EVEREST (2022+)

Upgrade your Ranger 2022 with our light bar bumper mount. Easily install a light bar for improved visibility and rugged off-road style. More Next Gen Ranger Accessories available.

nextgenranger.com.au

Dropping this here so I can remember it later. I think I can replicate it.

 

[Jacqueline22CJ]

Wishing you many happy miles with your new Ranger!!!