30" Led lightbar install

[HereComesHowell]

going to attempt to install this tonight after work any suggestions or tips i should know about?

 

[HereComesHowell]

This Light bar is off Ebay For $80 if anyone is wondering.

http://www.ebay.com/itm/31-5inch-18...Parts_Accessories&hash=item19e99c1776&vxp=mtr

Here is the quick test i did last night hooked up to my boat.

It came completely sealed amazingly enough.

 

[SLAYERMIKE]

Make sure you use a relay.

 

[HereComesHowell]

Make sure you use a relay.

yes for sure! will be posting pictures of the process and end results.

 

[HereComesHowell]

well we started working on it late so not as many photos as i wanted to take. but here ya go.

had to make a custom bracket so had to pull the bumper off to drill holes in it.

here is just my HID 6000k

here is my HID 6000k and my 30" Led light bar on

here is the front with the bar off.

then here is with the bar on.

I love the way it fits perfect in the bumper.

and here is the switch inside the truck.

let me know what yall think!

 

[X~FACTOR]

Very nice!
Does it blind on coming traffic?

 

[HereComesHowell]

Very nice!
Does it blind on coming traffic?

haven't tried it yet but when i walked in front of it, it blinded me! really don't want to get a ticket so its for off road use.

 

[HereComesHowell]

 

[HereComesHowell]

lights from driver seat. just HID 6000K

HID 6000K with 30'' LED light bar

 

[mbs4a]

fog light

good day

i have same model , asking if i can install the factory fog lamp in place , or this pumper is not allowing me to do that,,,,,

by the way you have good idea about your light

>>>>>>>>>>>

 

[DjDom]

I just realized something, your HIDs have a very decent pattern on that wall considering they're in reflectors. Not bad.

 

[HereComesHowell]

I just realized something, your HIDs have a very decent pattern on that wall considering they're in reflectors. Not bad.

yes they do thank you the right one is a little low after my wife bumped the right side of my truck with her car it tracked the mounting point. it was perfectly level and looked amazing but i just haven't fooled with it enough to get it back level.

 

[DjDom]

And that's in reflectors.. Still in shock. What kit you got in there? 9007 BiXenon?

 

[HereComesHowell]

And that's in reflectors.. Still in shock. What kit you got in there? 9007 BiXenon?

$60 H13 6000k hid kit off ebay

they are a cheap set and they work really good match the temp of the light bar perfect.

i may be getting a new set the left light got stuck on high beam lastnight.

 

[DjDom]

Oh yeah, 06's used H13s.
Damn. I hope my 9007 kit is of the same quality when it comes in.

 

[HereComesHowell]

Oh yeah, 06's used H13s.
Damn. I hope my 9007 kit is of the same quality when it comes in.

post up some pics when u put them in.

 

[DjDom]

post up some pics when u put them in.

Mine came in today, but way to cold to put them in. (-24 Celcius, -11 Farenheit)

Gonna wait till it warms up a bit..

 

[HereComesHowell]

Mine came in today, but way to cold to put them in. (-24 Celcius, -11 Farenheit)

Gonna wait till it warms up a bit..

oh ya I would wait too or use my heated Garage!!! :biggthump

 

[DjDom]

oh ya I would wait too or use my heated Garage!!! :biggthump

So I got them in in my buddies shop.

Here's the issue, they send H4 bulbs with a 9007 Ring Adapter. So they aren't 9007 and the bulb doesn't really match the filament..

High beam is in the low beam section.. Low beam is just a cluster blank of light.
Other than that, low beam has a fairly good pattern, with a very faint glow above the cutoff, which helps light up road signs to be honest.
I hate people with HIDs who blind others, but these do not glare at people's eyes. I have asked people to drive in front of me and towards me.

High beams.. which line up with low beam's filament location:

Low beams.. which just puke light everywhere:

 

[HereComesHowell]

So I got them in in my buddies shop.

Here's the issue, they send H4 bulbs with a 9007 Ring Adapter. So they aren't 9007 and the bulb doesn't really match the filament..

High beam is in the low beam section.. Low beam is just a cluster blank of light.
Other than that, low beam has a fairly good pattern, with a very faint glow above the cutoff, which helps light up road signs to be honest.
I hate people with HIDs who blind others, but these do not glare at people's eyes. I have asked people to drive in front of me and towards me.

High beams.. which line up with low beam's filament location:

Low beams.. which just puke light everywhere:

very nice! well my truck just took a crap on me and is at the dealer ship getting worked on!!! only good thing is im good friends with the shop supervisor so he workes in it himself after hours so labor is free!!