That4Lrangerbuild
New Member
- Joined
- July 25, 2024
- Messages
- 4
- Reaction score
- 2
- City, State
- Bouctouche nb
- Year, Model & Trim Level
- 2006 ranger extended cab
Bought an old work truck ranger from a guy down by on the island and i replaced the motor and transmission, transfer case, intake manifold gasket, intake manifold, thermostat housing, battery, starter, fuel filter, torx converter, after market electrical fan with a switch, spark plugs, spark plug wires, both valve covers, maf sensor, summit racing cold air, 1.5 inch spacers, new thermostat, new catalytic converters, new tensioner, Ac delete, egr delete, snaller belt, frame is painted,
Anyway long story a bit shorter (sorry) im looking to know what i should start by doing for mods to the motor, i know underdrive pulley’s would be a good start, head studs, new headers (mine are crusty and almost at its end), im not shooting for 500hp but a little more would be fun (without blowing it up) i have over 150 hours on this truck because its my first for alot of things
Anyway long story a bit shorter (sorry) im looking to know what i should start by doing for mods to the motor, i know underdrive pulley’s would be a good start, head studs, new headers (mine are crusty and almost at its end), im not shooting for 500hp but a little more would be fun (without blowing it up) i have over 150 hours on this truck because its my first for alot of things