4 channel amp with 3rd row seating

[iBrent]

Has anyone successfully hidden a decent sized (in terms of physical dimensions) 4 channel amp in a 3rd gen explorer with 3rd row seating? I don't want to mount it to any seat back because I need to be able to seat cousins in the car without fear of them coming in contact with exposed wires.

I measured the only logical place as I can see it, which is under the middle (20%) seat, as the other 40% seats have to be able to flip up to access the 3rd row. Unfortunately there isn't much room under there.

Any ideas?

 

[jad2411]

It's on an '02

 

[Nixthebomb]

really Like that amp

 

[iBrent]

Yeah, I saw that one, and I really like it. Also, I have the exact same amp.

Unfortunately, that's where the factory sub is which I would like to keep. So that location is out for me.

 

[jad2411]

Hmm, under the middle seat I was able to mount a small punch, I think 150.2 (stolen last week along with my sub ) but I have no idea where else could you mount the 4ch amp, unless you changed the sub to an aftermarket

 

[iBrent]

I found this on Crutchfield, looks promising:

http://www.crutchfield.com/p_500PDX5/Alpine-PDX-5.html?tp=115

I'll have to measure to confirm, but I'm pretty sure it will fit under the 20% middle row seat. This will power the doors, and let me switch out the factory sub for a different 8" and use the 5th channel on the amp for that.

 

[jad2411]

Nice!! but at 600US it's a little expensive for my taste hehe

 

[iBrent]

Nice!! but at 600US it's a little expensive for my taste hehe

Come on...nobody pays retail anymore .

http://cgi.ebay.com/PDX-5-ALPINE-5-...66:2|39:1|72:1234|240:1318|301:1|293:1|294:50

 

[Nixthebomb]

or http://www.sonicelectronix.com/item_12415_Alpine+PDX-5.html#