Dray492
New Member
- Joined
- November 23, 2015
- Messages
- 6
- Reaction score
- 0
- City, State
- El paso, tx
- Year, Model & Trim Level
- 1994 explorer 4x4
Okay so i got my truck last night and got it home surprisingly since it has not brakes unless i pump about 15 times. So i went and got a new caliper today since it's leaking, hopefully once i replace it and bleed the air they will be working. My question is about 4x4 though, i read the trouble shoot guide after not having an loghts on the push button controll at all and narrowed it down to the smaller plug at the computer being unplugged, i plugged it in and the lights work now but the low range light is always on at the push button but not at the dash and it won't switch to 4hi. I did the led test and it's blinking for times. I'm getting the clicking noise but the 4lo light stays lit. Any ideas? It's a 94 sport btw.
