94xlt4x4
Well-Known Member
- Joined
- January 30, 2006
- Messages
- 324
- Reaction score
- 1
- Location
- Southeast PA
- Year, Model & Trim Level
- 2012 Limited 4x4 3.5L
Hey everyone..I did search this, but couldn't find a definitive answer/good pic..
I'm just wondering what the correct routing is for the #4 plug wire (passenger side, rearmost plug) on a 5.0 - I had it routed between the valve cover and the intake, there was a clip on the back of the valve cover I believe? At any rate, the wire ended up against the EGR tube and melted. I kept the old wires, so I do have a spare, but I'd like to route it however it was done from the factory.
Any pics, descriptions, or what have you are greatly appreciated.
I'm just wondering what the correct routing is for the #4 plug wire (passenger side, rearmost plug) on a 5.0 - I had it routed between the valve cover and the intake, there was a clip on the back of the valve cover I believe? At any rate, the wire ended up against the EGR tube and melted. I kept the old wires, so I do have a spare, but I'd like to route it however it was done from the factory.
Any pics, descriptions, or what have you are greatly appreciated.