Joe93
Elite Dakota
- Joined
- February 25, 2001
- Messages
- 1,590
- Reaction score
- 1
- City, State
- Colorado Springs, CO
Well the BII arived yesterday and so it begins. I will be taking pics all along and will have some up later tonight. the first major project will be the 4.0 swap. I will be doing this project one thing at a time unlike the sploder where i had 50 things taken apart. it got a little confusing at times. it will be getting the 91 sploder dash for a couple of reasons. 1st is the BII dash is trashed, 2nd is i spent alot of time to wire a 93 dash to work with a 91 sploder. they are not the same trust me. also it will be getting a 4.0 swap so if anyone has any tips on this lets hear them.
Ok a little about the 87 Bronco II. its an 87 4x4 with the 2.9 5spd trans and manual transfer case. i purchased this for 150 bucks with the original plan to put a clutch in it and resell it. but it needed a little more work then i was told. So i was thinking what the hell do i do with it know. Well its going to be my new trail rig. It came from the great state of alaska. Surprisingly there is verry little rust on this thing. just surface rust, better then the sploder was. now onto the list of mods that it will recieve.
4.0 Swap with Manual trans and Manual T-case-doubler later on
Dana 44 swap- Fullwidth 77 F150(with the weld on mounts and thicker tubes)
Ford 9 inch Swap- Fullwidth 77 F150(non banjo style)
Chop top- With custom soft top made by me-
Roll cage-
37" Mtrs or 38" Tsl's- with beadlocks
Bumpers, Sliders, etc.
Ok a little about the 87 Bronco II. its an 87 4x4 with the 2.9 5spd trans and manual transfer case. i purchased this for 150 bucks with the original plan to put a clutch in it and resell it. but it needed a little more work then i was told. So i was thinking what the hell do i do with it know. Well its going to be my new trail rig. It came from the great state of alaska. Surprisingly there is verry little rust on this thing. just surface rust, better then the sploder was. now onto the list of mods that it will recieve.
4.0 Swap with Manual trans and Manual T-case-doubler later on
Dana 44 swap- Fullwidth 77 F150(with the weld on mounts and thicker tubes)
Ford 9 inch Swap- Fullwidth 77 F150(non banjo style)
Chop top- With custom soft top made by me-
Roll cage-
37" Mtrs or 38" Tsl's- with beadlocks
Bumpers, Sliders, etc.