tylork92
New Member
- Joined
- July 12, 2012
- Messages
- 9
- Reaction score
- 1
- City, State
- Gastonia, NC
- Year, Model & Trim Level
- 93 Explorer/93 Ranger
Bought the truck from my uncle for a little over $300. Bought it as an SPL project vehicle. Upon picking up the vehicle there was ALOT of small things as well as big things that needed done.
New window motors, replace drivers back vent glass, strip interior and replace the majority of it, deaden everything, clean carpet, new seats, new headliner, ball joints, tires, etc.
heres pics of getting it ready for the audio part of this build:
Carpet was TRASHED. after HOURS of scrubbing i got it cleaned enough to dye it. also ripped all the old jute padding off, that crap is horrible and is nothing but a place to hold moisture and odor.
100% coverage on the floor of AudioTechnix deadener and a layer of 1/8" closed cell foam (yoga mat).
junk yard seats cleaned up nicely, before on left after on right.
had to reinforce and patch up the busted original headliner board.
Dyed carpet:
new headliner wrapped.
New window motors, replace drivers back vent glass, strip interior and replace the majority of it, deaden everything, clean carpet, new seats, new headliner, ball joints, tires, etc.
heres pics of getting it ready for the audio part of this build:
Carpet was TRASHED. after HOURS of scrubbing i got it cleaned enough to dye it. also ripped all the old jute padding off, that crap is horrible and is nothing but a place to hold moisture and odor.
100% coverage on the floor of AudioTechnix deadener and a layer of 1/8" closed cell foam (yoga mat).
junk yard seats cleaned up nicely, before on left after on right.
had to reinforce and patch up the busted original headliner board.
Dyed carpet:
new headliner wrapped.
