mfitz725
03 EB 4x4 4.6l making it thru in NC
- Joined
- August 1, 2007
- Messages
- 204
- Reaction score
- 15
- Location
- Albemarle NC
- City, State
- Albemarle NC
- Year, Model & Trim Level
- '03 Eddie Bauer 4.6L 4x4
I have a 99 Limited 4.0LSOHC with the EATC system. I discovered today that I have no heat. A/C works great and can switch over to defrost, panel or floor vents with no problem. I am not sure where to start looking for the problem as I have understood the blend door is a problem if you are getting hot air all the time.
I am wondering about the heater control valve. Mine for some reason has an actual valve (with threads) on top of it. Is there a way to test this? Or am I barking up the wrong tree. Any suggestions on what to check would be helpful and appreciated.
I am wondering about the heater control valve. Mine for some reason has an actual valve (with threads) on top of it. Is there a way to test this? Or am I barking up the wrong tree. Any suggestions on what to check would be helpful and appreciated.