hawker476
New Member
- Joined
- August 12, 2011
- Messages
- 4
- Reaction score
- 0
- City, State
- Atlanta
- Year, Model & Trim Level
- 2002 Ford Explorer
Hey folks,
Been researching all day and have learned a lot of good stuff. Man this site is a valuable resource. My air within my air conditioning system does not change vents. A tiny bit of air is coming out of the main vents, but most air is coming out of the defrost vents up by the windshield. The temperature change control is working. I can make it hot/cold/etc, but I can't change where the air flows out of.
I took out the glove box to peek at the vacuums and all of those a/c related components within the "behind the glove box" area and found that the little metal bars connected to the back of those silver vacuum things are not moving at all upon changing the modes of a/c zones with the knob. Not a single one is working that I can see.
I have checked the fuse and it appears to be fine. I have a 2002 Ford Explorer and just checked fuse #10 with a continuity tester. Any advice would be much appreciated. Thanks!
Been researching all day and have learned a lot of good stuff. Man this site is a valuable resource. My air within my air conditioning system does not change vents. A tiny bit of air is coming out of the main vents, but most air is coming out of the defrost vents up by the windshield. The temperature change control is working. I can make it hot/cold/etc, but I can't change where the air flows out of.
I took out the glove box to peek at the vacuums and all of those a/c related components within the "behind the glove box" area and found that the little metal bars connected to the back of those silver vacuum things are not moving at all upon changing the modes of a/c zones with the knob. Not a single one is working that I can see.
I have checked the fuse and it appears to be fine. I have a 2002 Ford Explorer and just checked fuse #10 with a continuity tester. Any advice would be much appreciated. Thanks!