A4LD valve body TCC screen | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

A4LD valve body TCC screen

jackrussell

Active Member
Joined
February 3, 2014
Messages
80
Reaction score
0
City, State
Longview, Texas
Year, Model & Trim Level
1991 ford ranger xlt
Do I need to replace the TCC Screen (the little 3/4" long x 1/4" diameter filter) in my A4LD valve body when rebuilding?
If so, somebody tell me where it fits in the valve body.
Please and thanks.
1991 Ranger.
 






You don't have to replace it if it's not damaged. Take a look at the left hand corner of this photo from Transgo for the location of the push in filter. It's pressed into the separator plate.

TransGo_2_solenoid_A4LD_valve_body_diagram_.jpg
 






BrooklynBay,
Thanks again for your assistance. This is just what I needed.
(the trouble with it is now I have to check my valve body again with these instructions - the instructions that came with my TransGo kit was very outdated- 1991 vs. 2006)
I'm very glad I received this info before I installed the valve body - hopefully tomorrow.
Tom.
 






Back
Top