ABS module | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

ABS module

just1me

Well-Known Member
Joined
July 3, 2010
Messages
479
Reaction score
2
City, State
Pryor, OK
Year, Model & Trim Level
1998 Ranger Stepside 2.5
I have a request for any early 2001 Job 1 Sport Tracs. I been trying for a good while now researching to find the part number for the ABS module for an early 2001 Sport Trac to no avail. All I have found so far is that there is listed 2 separate modules for 2001, one before 7/23/00 and one after 7/24/00 but all I have found is the one listed afterwards, does anyone know the early model part number? I am curious because I been trying to figure out the changes between the early and late 2001 models for some time, thanks.
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Model # 1L54-2C346-AB

Not sure if it's different for 4x2 but that's what my 4x4 has.
 






Thanks is your Sport Trac an early 01 before 7/23/00, cause it lists the same part number for after 7/24/00 also unless Ford used the same module for the early/late model 2001, which I guess could be possible. Yeah the 4x2 lists as 1L54-2C346-BB
 












Thanks, you could easily do a 5.0 swap in that, the early 2001 had the same VSS, and PATS B as the 99-01 Explorer. It's strange that Ford would use the same ABS module for early/late 2001 because pin 19 on the early ABS connector is the VSS signal gy/bk, but late 01 it's just a blk wire that goes nowhere.
 












Back
Top