I'm selling a set of wheels and tires that I had been running on my truck for awhile, but changed them out for a set that were more off-road capable last year and these have been in storage ever since. I will be driving from Gainesville, FL to Pahrump, NV on 7/28/16 and could meet up with someone along the way if needed.
2012 Acura MDX 18x8x45 wheels
265/60-18 Falken Ziex ZE-612 tires
(2) 1.25" billet aluminum adapters (5x4.5 to 5x120)
(2) 1.75" billet aluminum adapters (5x4.5 to 5x120)
All lug nuts needed for installation
The adapters were custom built by Lugman USA in Jacksonville, FL for me several years ago for a set of 20" TSW rims that I got insanely cheap, making it worthwhile to spend the $300 for the adapters. They are hubcentric to the truck (70.3mm) and were made to also be hubcentric for the wheels (72.0mm). Those wheels got sold to someone who didn't need the adapters when I decided to lift my old truck, so when I got another Sport Trac I decided to put them to use again and found the MDX wheels. The MDX wheel center bore was slightly too small, so I had them machined out to match the wheel adapters, making them hubcentric again.
The tires were bought in 10/2012 from Discount Tire and have about 23K miles on them, with tons of tread left. Most of those miles were on trips from Florida to Illinois or Kentucky. They were rotated every 5K miles and I will have them re-balanced before selling them. I removed them in 8/2015 and they've been stored in my garage since then. The wheels are in great condition, with no curb rash at all. One center cap is missing, but they can be had cheap on Amazon.
I've got $300 in the adapters, $550 in the rims, $600 in the tires and $50 for the ball-seat lug nuts that these wheels require.
2012 Acura MDX 18x8x45 wheels
265/60-18 Falken Ziex ZE-612 tires
(2) 1.25" billet aluminum adapters (5x4.5 to 5x120)
(2) 1.75" billet aluminum adapters (5x4.5 to 5x120)
All lug nuts needed for installation
The adapters were custom built by Lugman USA in Jacksonville, FL for me several years ago for a set of 20" TSW rims that I got insanely cheap, making it worthwhile to spend the $300 for the adapters. They are hubcentric to the truck (70.3mm) and were made to also be hubcentric for the wheels (72.0mm). Those wheels got sold to someone who didn't need the adapters when I decided to lift my old truck, so when I got another Sport Trac I decided to put them to use again and found the MDX wheels. The MDX wheel center bore was slightly too small, so I had them machined out to match the wheel adapters, making them hubcentric again.
The tires were bought in 10/2012 from Discount Tire and have about 23K miles on them, with tons of tread left. Most of those miles were on trips from Florida to Illinois or Kentucky. They were rotated every 5K miles and I will have them re-balanced before selling them. I removed them in 8/2015 and they've been stored in my garage since then. The wheels are in great condition, with no curb rash at all. One center cap is missing, but they can be had cheap on Amazon.
I've got $300 in the adapters, $550 in the rims, $600 in the tires and $50 for the ball-seat lug nuts that these wheels require.
