Add a Leaf kit

[Covrace]

I want an ADD A Leaf kit. does anyone have any part numbers to fit the rear of my 1993 XLT????? I've heard that all you do is remove the u-bolts,jack the axle out of the way and pull the center pin on the spring. is it truly this easy????? My rear is sagging a little(on the truck!!!), how much lift can I expect of this kit???I can add shackles as my class three hitch would get in the way. So this is currently the only way to gain some height.
thanks!!

 

[NoBoundaries]

Here you go!

http://store.summitracing.com/part....2RX&part=2D25BDEC-3630-11D3-949D-080009FC5B5F

All the info you need is at the link, I know it works for 95+'s, all Explorers have the same rear end, so there is no reason it should not work for you.

 

[Tyson]

Yes, it really is that easy. It would have been easier for me if I had 4 jack stands (two for the frame, two for the axle), but I managed... Good luck.

 

[Covrace]

so what you guys are saying, is I could go to any speed shop or auto parts store and get a "plain jane" add a leaf kit for a generic "Truck" and it should fit my 1993 XLT.
ok, I just didn't think it was that easy.

 

[2001ExpSport]

I looked at the sight, man they are cheap. Only thing is that I noticed they only have them for up '97. Did they change the leafs for '98+? Does anyone know if the '97 will fit my 2001? I believe the 01 has the same suspension as the 98, 99 and 00's. I am planning to do a torsion lift and add a leaf. Shackles won't give me the height I want. Any info would be great guys!

 

[Guerilla Biscuits]

I think all Explorer rear ends are the same.

 

[2001ExpSport]

THat's what I thought. Thanks G.

 

[MNRob]

I have a 95 sport, and had a great deal of sag when I hooked up my boat. Instead of putting in an add-a-leaf, I replaced the single leaf spring with the springs out of a 94 4-door. It solved the sag problem and didnt change the rine of the truck.

Rob