ADDING LED LIGHTS INSIDE | Ford Explorer - Ford Ranger Forums - Serious Explorations
  • Register Today It's free!

ADDING LED LIGHTS INSIDE

davidmmm69

Elite Explorer
Joined
September 1, 2003
Messages
2,655
Reaction score
23
Location
Fall river ma
City, State
2010 Ford Explorer V6 Fall River Ma...
Year, Model & Trim Level
2002 Mercury Mountaineer
Alright so I have my 2010 Explorer and I am trying to add some LED lights under the dash on each side.
I was able to accomplish this with ease on my mustang and Mountaineer. But for the love of me I can not find any wire to tap into to come on with the dome lights? Tried behind the kick panels on both sides and swear i tried every wire...

Can any one point me in the direction to which wire to tap into? I have the 4 led strips already to go.

Thank you in advance..

David
 






DiGiornoRisingCrust

Active Member
Joined
April 11, 2018
Messages
82
Reaction score
2
Year, Model & Trim Level
2007 Explorer Eddie Bauer
I’d just use a fuse tap. You’ll need type ATC. Fuse 23 should be the one for interior lights.

Just take out the old fuse, put it in the lower slot of the tap, and put the tap into the fuse slot.
 






davidmmm69

Elite Explorer
Joined
September 1, 2003
Messages
2,655
Reaction score
23
Location
Fall river ma
City, State
2010 Ford Explorer V6 Fall River Ma...
Year, Model & Trim Level
2002 Mercury Mountaineer
I’d just use a fuse tap. You’ll need type ATC. Fuse 23 should be the one for interior lights.

Just take out the old fuse, put it in the lower slot of the tap, and put the tap into the fuse slot.
but that wont work when I open the doors
 






Top