nevrsumr22
Active Member
- Joined
- November 10, 2004
- Messages
- 80
- Reaction score
- 0
- City, State
- Bel Air, MD
- Year, Model & Trim Level
- 2002 XLT 4x4
My hood on my truck is getting that cloudy look to it so I'm going to attempt to spray clear it myself. It just started this summer after a wax so I don't think the paint is affected yet.
From doing a lot of reading and watching a few youtube videos I'm going to start with a rubbing compound to get the surface ready. Clean all that off then apply a coat of clear. Wet sand that depending on how many bumps up to 2000 grit then apply again. Wet sand to 2000 again then rubbing compound to polish it off.
Does this sound ok? I might practice on my gas grill first.
From doing a lot of reading and watching a few youtube videos I'm going to start with a rubbing compound to get the surface ready. Clean all that off then apply a coat of clear. Wet sand that depending on how many bumps up to 2000 grit then apply again. Wet sand to 2000 again then rubbing compound to polish it off.
Does this sound ok? I might practice on my gas grill first.