Any Phoenix area members with manual hubs on Dana 35??

[Rick]

If so I need to check something out. Please send me a PM.

Thanks

 

[Maniak]

Rick, I have them, and I'll be re-torquing the bearings this weekend.. Did you need a pic or a measurement?

~Mark

 

[Dannyboy]

I've got them, plus a couple spares laying around.

 

[Rick]

Danny, does your blue rig have a stock type D35 spindle and manual hub setup?

 

[Rick]

Rick, I have them, and I'll be re-torquing the bearings this weekend.. Did you need a pic or a measurement?

~Mark

Not sure yet... stay tuned

 

[Dannyboy]

Yes, everything is stock on the spindle except it has oversized lug studs. The hub has the stud holes drilled out to fit the larger studs.

 

[Rick]

I need to know how far the lock nut assembly protrudes into the hub.

 

[Rick]

Rick, I have them, and I'll be re-torquing the bearings this weekend.. Did you need a pic or a measurement?

~Mark

bump ^

 

[RangerX]

Rick, I just measured on my spare axle. It's 2 7/16" out, from the hub mounting surface of the rotor to the end of shaft.

 

[RangerX]

Eh, just reread your question.
It's 13/16" to the outer locknut. Is that what you want to know?

 

[Tbars4]

...i'm not sure if this will help you but this is a blowup from ford...for reference if you have a first gen in front of you, item 3b457 is the c clip on spindle and 3b458 is the splind washer...i am thinking you are looking into something else but maybe this will help...

 

[Rick]

I posted pics to this thread: http://www.explorerforum.com/forums/showthread.php?p=1767453#post1767453

Doesn't look like they will work