Anyone have 34x10.50s with a torsion twist?

[5.0]

Anyone run a set up like this... There is a '96 or '97 Explorer at this place I go and he has the torsion bars cranked with a shackle lift in the back and is running 34x10.50/15 Swamper TSL's... with NO body lift. The thing looks cool, but the back sits noticeably lower than the front, so I was thinking of doing a spring over in the rear instead of the shackle lift.

 

[XLT]

To make that work you will have to get the sawzall out if you only do a tt.

 

[5.0]

This one wasn't cut, it still had the plastic ground effect things under the doors too. There is no suspension lift or body lift. I didn't crawl under it to see if there was any down travel left in the front, but I could certainly see the obvious. I bet his CV's wear quick, though.

 

[MarkieMark703]

I know this sounds stupid to ask but where is the torsion twist located at on a explorer.

 

[dkchrist]

I know this sounds stupid to ask but where is the torsion twist located at on a explorer.

A search will serve you well, young kemosabe.