rc1626
Active Member
- Joined
- January 31, 2002
- Messages
- 51
- Reaction score
- 1
- City, State
- Long Island, N.Y.
- Year, Model & Trim Level
- 99 Explorer XLT
2001 Explorer with ARC. Rear passenger side of vehicle is sagging. Went under the rear of vehicle and forced the arc to adjust by pushing up on the ride control sensor. When the rear adjusts itself for load the passenger shock is always off by a 1/2 inch in comparison to the driver side shock. Air is injected into both shocks but no matter how it settles the driver side is always a 1/2 inch higher than the passenger side. Bad shock? Any advice would be appreciated.
Thanks in advance.
Rob
Thanks in advance.
Rob