Awesome snorkel build.

[Thompstomper]

Wanted to share my snorkel build.

3' Exhaust tubing and elbow,$22 dollar e-bay snorkel head and $25 bucks worth of PVC.
I have like $90 bucks in this build.

Threaded and sealed PVC in to the stock sealed air box.
Caped the factory intake on the box with a rubber PVC pressure cap 2.5'


Whatcha Think?

 

[Gary Simpson]

Clean snorkel. 5.0L is icing on da cake

 

[Gary Simpson]

Nice on 4.0 air box too it's perfect for snorkel hook up

 

[Thompstomper]

Forgot the "A'' pillar mount photo.

 

[RangerX]

Good lookin'!
What's the textured looking section, that's a nice touch.
How about a closeup pic of that little bracket that holds the tube to the A pillar?

 

[DCVR 614]

At first it looked weird but I really like it! Nice job!

 

[rabbit91]

x2 on the pic holding it to the A pillar, do you have a link for the snorkel head?

very nice work, one of the cleanest ive seen

 

[Thompstomper]

Thanks guys,I didnt want a hack job.
All tig welded.
Drove it thru 4 feet of water with only an alternator as a casualty when Got home.



http://www.ebay.com/bhp/snorkel-head

I'll snap a few pics of the mount tomorrow.
I used carbon fiber vinyl sheeting as a brush guard to keep from beating off the paint.

 

[Thompstomper]

Thats a spectra brand cold air intake hose from the PVC to the tubing 2.5 to 3.00' From Orielly's
$6 bucks.

 

[Thompstomper]

x2 on the pic holding it to the A pillar, do you have a link for the snorkel head?

very nice work, one of the cleanest ive seen

 

[gmanpaint]

If you have a few spare minutes someday....

Could you post a close up pic of the PVC to Air filter housing connection? Maybe give a brief description & specs of how it is attached?

Much appreciated!