Back up camera 2017 compatibility with 2013?

[Dr3mb0y]

Hi guys!
Came across a local ad of someone selling a 2017 liftgate/hatch emblem with back up camera with part number FB5Z*13B482*AA.

Since the new back up camera is equipped with washers(very useful after rain or snow), I am intrigued if i can fit it in my 13 ex like plug and play.. Just get some tees for the washer hose line since the washers are rear wiper activated in the 16 and 17 models.

Any input is much appreciated. Thanks in advance.

 

[peterk9]

You are the first to bring this up. When checking online parts site I see that the 2017 has Rear and Front "feed lines" shown. When checking the 2013 it shows a "Front hose" and a "Washer hose" which doesn't have any other designation.
http://parts.autonationfordwhitebea...sher-components-scat/?part_number=bb5z17a605c
http://parts.autonationfordwhitebea...rical-cat/wipers-scat/?part_number=bb5z17508b
Sounds doable but can't say for sure.

Peter

 

[Dr3mb0y]

Thank you so much for the reply with the part numbers.

next question is what is the part number of the frame/housing the 17 explorer uses to put in the nozzle and all to the 13...

been trying to look at part stores online but i havent gotten luck.