Camber Adjustment on the Gen 2?

[Runnin'OnEmpty]

I understand the Gen1's have an eccentric on the top ball joint to change camber, but the Gen2's (specifically 2000) have eccentric bolts where the A-arm attaches to the chassis. Is this correct, and if so, how hard are these to adjust?

Thanks,
ROE

 

[410Fortune]

Yes they do, eccentric bolts turn to adjust. Moves the upper arm in and out. there are different degrees of adjsuters for the a arms as well.

 

[IAmTodd]

Explorers do not come stock with the eccentrics though. They are preset with spacers from the factory.

 

[Runnin'OnEmpty]

OK, thanks guys. Anyone have a source for the camber adjust kits? The local Autozone, Advance, NAPA, doesn't seem to carry them.....

 

[IAmTodd]

Advance carries them. Thats where I got them.

 

[IAmTodd]

I believe these are the ones I have.

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=TRW&mfrpartnumber=13264A&parttype=131&ptset=A

These are what they look like though:

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=NOR&mfrpartnumber=44767&parttype=131&ptset=A