Can anyone help me decipher as built data codes for my bcm

[Kikinz24]

As the title States I'm having issues deciphering as built data I have a 2015 Base and installed the complete Dash and full body wiring harness from a 2014 I wanted the 8" mft with sync.. The radio works perfect and the GPS signal is there but none of my hvac controls work the touch screen doesn't allow me to select any hvac and the 8" mft bezel doesn't work either.... I've changed over the as built data for the eatc already and that didn't change a thing. So I pulled the as built data from another 2012 limited. And there are a few bcm codes the 2012 and 2014 share that my 2015 differs. Which I think may allow my hvac and heated seats to work . bc through forscan I see all hvac controls are ran by canbus, But I don't want to go all crazy changing codes and messing my bcm up lol any help would be greatly appreciated

 

[Kikinz24]

What I have pulled together is as built data from a 2012 limited and this 2014 xlt that has the same bcm codes that differ from my 2015... There are 7. I'm unsure what any of these codes are I've pulled all the data sourced out from the f150 forum but they don't match up to these to make any sense..

726-11-01
726-16-01
726-20-01
726-25-01
726-27-01
726-36-01
726-41-01

 

[PlatinumOwner]

Have you tried as-built data for the APIM from the same model year (2015) instead of 2012?

 

[PlatinumOwner]

Save your APIM config and try this.

APIM 7D0-01-01 A221 1101 EB99
APIM 7D0-01-02 0003 4000 021F
APIM 7D0-02-01 5553 0104 40C7
APIM 7D0-02-02 8200 0000 005D
APIM 7D0-02-03 0000 DC
APIM 7D0-03-01 014B 5800 007F
APIM 7D0-04-01 0103 0200 00E2
APIM 7D0-04-02 0001 DE

 

[PlatinumOwner]

I'm looking to the BCM changes for climate and heated seats

Edit: there are none.

 

[PlatinumOwner]

The APIM/Front Controls directly communicates to the EATC, it does not go through the BCM.

There is one setting in the EATC for APIM type. The rest of the settings are for compressor type, engine, and the vehicle VIN number.

733-01-01 xx*x xxxx xxxx 2=Gen 1, 6=Gen 2

 

[PlatinumOwner]

APIM Climate settings for MFT

APIM 7D0-01-01 xxxx x..* xxxx 1=dual climate zone, 5=single climate zone
APIM 7D0-01-02 xxxx x*xx xxxx 0=automatic climate control, 4=manual climate control

There are a few other settings for rear climate and "climate control repeater" as well...

 

[Kikinz24]

Ok i can try these different ones when I get home. The apim is from a 2014 and when connected to forscan shows these values.

7D00101 2221 1000 6B97
7D00102 0001 4000 021D
7D00201 5553 0004 0086
7D00202 8200 0000 005D
7D00203 0000 DC
7D00301 014B 5800 007F
7D00401 0103 0200 00E2
7D00402 0001 DE


AS FOR THE EATC MY VALUES ARE THESE
7330101 0009 0064 50F9
7330102 0028 0000 65
7330201 3146 4D35 4B81
7330202 3842 3830 4666
7330203 4741 3537 3265
7330204 3737 AE

AND THE 2014 EATC WHICH I PLUGGED IN (was told I had to due to auto air. And mine had manual air)
733010 0029 0056 500B
7330102 6420 0000 C1
7330201 3146 4D35 4B81
7330202 3744 3830 4566
7330203 4741 3033 305A
7330204 3135 A6

I Guess where I am I a bit confused is do I enter all the values or do I need to figure which ones are my vin and leave those particular ones alone.. I really hoped the f150 info would work as people have already broke down each asbuilt code.. But they are way different from what I've read

 

[PlatinumOwner]

Ok i can try these different ones when I get home. The apim is from a 2014 and when connected to forscan shows these values.

7D00101 2221 1000 6B97
7D00102 0001 4000 021D
7D00201 5553 0004 0086
7D00202 8200 0000 005D
7D00203 0000 DC
7D00301 014B 5800 007F
7D00401 0103 0200 00E2
7D00402 0001 DE


AS FOR THE EATC MY VALUES ARE THESE
7330101 0009 0064 50F9
7330102 0028 0000 65
7330201 3146 4D35 4B81
7330202 3842 3830 4666
7330203 4741 3537 3265
7330204 3737 AE

AND THE 2014 EATC WHICH I PLUGGED IN (was told I had to due to auto air. And mine had manual air)
733010 0029 0056 500B
7330102 6420 0000 C1
7330201 3146 4D35 4B81
7330202 3744 3830 4566
7330203 4741 3033 305A
7330204 3135 A6

I Guess where I am I a bit confused is do I enter all the values or do I need to figure which ones are my vin and leave those particular ones alone.. I really hoped the f150 info would work as people have already broke down each asbuilt code.. But they are way different from what I've read

I just added decodings on the EATC & HVAC tab on my Explorer spreadsheet

https://www.icloud.com/numbers/0AtiYU-yJ4Nrfyfuzp-Mi0l8A

 

[jmr061]

Did you get this figured out yet? You didn't have to do all of this if you were just looking to change to MFT. Now if you were going for dual zone climate in addition to MFT then yeah lots of work.

 

[Kikinz24]

Did you get this figured out yet? You didn't have to do all of this if you were just looking to change to MFT. Now if you were going for dual zone climate in addition to MFT then yeah lots of work.

Not yet I will be out there tomorrow to work on it. I had a complete parts vehicle and had the dash out anyhow so I decided to change it all over.. I literally have the entire cars wiring dash and hvac all installed into mine and a bare shell sitting outside now. So I will work on the computer a but tomorrow and hope it gets things working

 

[Kikinz24]

I just added decodings on the EATC & HVAC tab on my Explorer spreadsheet

https://www.icloud.com/numbers/0AtiYU-yJ4Nrfyfuzp-Mi0l8A

If there is any way you can contact me I have a few questions regarding this. I gave up on my base but just purchased a 2015 interceptor with sync and no rear hvac and am trying to get this all to work in it. I tore the entire interior out because I have a full leather interior to put in.