scdix50
Elite Explorer
- Joined
- March 8, 2011
- Messages
- 218
- Reaction score
- 1
- City, State
- New Castle, Delaware
- Year, Model & Trim Level
- 2008 XLT
I put a standard 10mm bolt washer between the bolt retainer & engine adapter on the large Ilder pulley. This will move the belt back away from the rolled edge of the pulley to the flatter part of pulley. At idle the belt is trying to conform to the rolled edge of the pulley. All I had to do was moved the belt tracking about 3mm's.