Clock issue since the MFT 3.2.2 update

[Dr Plastic]

Ever since I updated the MFT to 3.2.2 my clock, when I set it to GPS sync it reads an hour ahead. when I adjust it back it turns off the GPS sync.

What gives?

 

[JDraper]

Try changingy your Daylight Savings Time setting.

 

[13Sport]

Ever since I updated the MFT to 3.2.2 my clock, when I set it to GPS sync it reads an hour ahead. when I adjust it back it turns off the GPS sync.

What gives?

You don't have the DST setting correct.. if it is currently DST then you need to set this to on, and if not, to off.

Since it is currently not daylight savings time, this should be set to off.

On a side note, this issue goes away if you get MFT updated to 3.5.1, they added in automatic adjustment of the clock for daylight savings time (based on GPS coordinates)

 

[Dr Plastic]

Hmmm...I did not see a setting for this.

Thanks I will check it out....

 

[Dr Plastic]

Well I had to turn off the DST in order for the time to be right with the GPS sync

 

[13Sport]

Well I had to turn off the DST in order for the time to be right with the GPS sync

Sounds correct, glad we could help!

 

[peterk9]

Well I had to turn off the DST in order for the time to be right with the GPS sync

There are also posts on this in the following thread;

http://www.explorerforum.com/forums/showthread.php?t=373699

Peter

 

[Dr Plastic]

Makes ya kinda wonder why did they even put the DST button on there when it takes less button pressing to just do it manually!