Cstoliker
Well-Known Member
- Joined
- July 19, 2008
- Messages
- 288
- Reaction score
- 7
- Year, Model & Trim Level
- 2000 Explorer XLT
Hey guys. If someone gets a chance can you watch this video and confirm my trouble codes? it's a 95 Explorer XLT 6cyl 5
http://www.youtube.com/watch?v=s7P-H4sdNzc
I started by clearing the codes and drove till the engine light came on (about 10 miles @ 45-50 mph)
First is KOEO.
Then started engine waited for 3 blinks (6Cyl) pressed brake pedal and let the engine go though it's test. Then the KOER codes displayed.
Thanks for your time.
I read:
332
Insufficient EGR Flow Detected or Insufficient EGR Flow Detected C/R
116 ECT out of self test range 0.3 to 3.7 volts.
172 HEGO sensor circuit indicates system lean (right side)
Any ideas what all this points to?
http://www.youtube.com/watch?v=s7P-H4sdNzc
I started by clearing the codes and drove till the engine light came on (about 10 miles @ 45-50 mph)
First is KOEO.
Then started engine waited for 3 blinks (6Cyl) pressed brake pedal and let the engine go though it's test. Then the KOER codes displayed.
Thanks for your time.
I read:
332
Insufficient EGR Flow Detected or Insufficient EGR Flow Detected C/R
116 ECT out of self test range 0.3 to 3.7 volts.
172 HEGO sensor circuit indicates system lean (right side)
Any ideas what all this points to?
