94 Crawler
Well-Known Member
- Joined
- March 9, 2007
- Messages
- 317
- Reaction score
- 0
- City, State
- Stantonsburg,NC
- Year, Model & Trim Level
- '94 Ranger SuperCab
I hope It's ok to post this here. The wife and I are starting the sas on her Mitsubishi Montero, and while this is not a ford product I have gotten a lot of ideas from members rides on Explorerforum as to how I will complete this build. Any feed back will be great.
Here is the plan. We are planing on converting front and rear to leafs. 63" chevys out back and grand waggys up front. The axles I already have are from a 90' grand waggy. The reasons I went this way are as follows. The narrow width of the front and rear, drivers side drop, and the bolt pattern is the same as the existing wheels. By doing this I am going from a 9" rear gear to a 8.5" rear. But stock the montero has 27 spline axles and the 44 is 30 spline so I think I will be ok as we will stay under 35" tires. so here are some pics.
Here is the plan. We are planing on converting front and rear to leafs. 63" chevys out back and grand waggys up front. The axles I already have are from a 90' grand waggy. The reasons I went this way are as follows. The narrow width of the front and rear, drivers side drop, and the bolt pattern is the same as the existing wheels. By doing this I am going from a 9" rear gear to a 8.5" rear. But stock the montero has 27 spline axles and the 44 is 30 spline so I think I will be ok as we will stay under 35" tires. so here are some pics.