Cruise Control........

[The Red Ex]

Changed out the buttons on the steering wheel but still no cruise, not even an indicator light on the dash. There is no fuse to solely support cruise control itself according to the owners manual, any suggestions would be appreciated, thank you.......

 

[drdoom]

Have you checked the switch on the master cylinder?

 

[swshawaii]

^ Ditto. Not just a fire hazard with the engine off, common cause of the cruise control not working. Red/orange switch = BAD. :fire:

Speed Control Deactivation Switch Recall (09S09)
http://www.explorerforum.com/forums/showthread.php?t=262765

 

[albi1cnobi1]

There is a self diagnostic for the cruise control system. With the key off, press and hold the cruise control "off" button. While holding the "off" button turn the key on but not start and the cruise control light should flash. Release the off button then one at a time press and release the "on", "set/accel", "rsm" and "coast". The cruise light should flash after each button press and the cruise module should activate and release the throttle after the last press. If you don't get a light flash after each switch press, that switch is bad. If there are any problems, the cruise light will flash a code to let you know whats up. I'l try to find the codes in the manual and post them up.