Cylinder misfire code driving me crazy | Page 2 | Ford Explorer - Ford Ranger Forums - Serious Explorations
  • Register Today It's free!

Cylinder misfire code driving me crazy

Ranger 96

Member
Joined
October 20, 2009
Messages
30
Reaction score
0
City, State
Michigan
Year, Model & Trim Level
1996 Ranger
Now what????

OK Tbars,
I have a new issue: the 1996 ranger 4.0L that i have is a 5 speed manual, if I am driving down the road and I depress the clutch to roll to a stop sign the engine will maintain about 2100rpm's until I am almost stopped, then the truck will idle normal.
I have also noticed that while idling in the driveway she will rev up then back down on her own. RPM range from about 1800 to 850 or so at idle.
 






Tbars4

Moderator Emeritus
Elite In Memoriam
Joined
March 4, 2007
Messages
26,353
Reaction score
85
City, State
anaheim hills,california
Year, Model & Trim Level
95 ranger 4x4/ 91 X 4x4
...I would first clean the MAF...Your post of..
if I am driving down the road and I depress the clutch to roll to a stop sign the engine will maintain about 2100rpm's until I am almost stopped,

..is normal as your vehicle does not know the reasoning of the clutch being pushed in so it will keep the same rpm's until it senses the speed is stopped...That is not saying you shouldn't also clean the IAC...
 












Top