well i have a 92 explorer sport with f150 coil springs shackel lift and and 3in b.l runnin 33's...well i wanted to go and get the 6" lift for it but i figured i do that and run 35's after a while say good bye to the front end wouldent last to long....so right now i have a 9in rearend out of a 79 f250, a 351 engine out of a galaxie and a c6 trans, and i figured for the front if im gonna do it im gonna do it right i was on danatrac's web sites compareing front end's and im deff going with the dana 60 as compared to the dana 44 it is ten times more stonger and will last longer.so my plans are to spend 3200 on the motor and get 700hp out of that change the gear in the 9in to either a 456 or 511 beef the trans up and then order a dana 60 from dynatrac with either 456's or 511's undecided i am not going to get the axles shortened so way less top heavy if i dont and gonna run leaf springs for my lift my goal is to be running 44's or 53'' mich tires i know big diff there but you get the point i am gonna start tareing apart the motor this weekend and order all my parts soon tell me what you guys think and ill keep updated