timz
New Member
- Joined
- April 29, 2006
- Messages
- 8
- Reaction score
- 0
- City, State
- WI
- Year, Model & Trim Level
- 2005 XLT
Help! I have always had poor airflow from my defrost vents. There isn't enough airflow to the windshield to keep from fogging up with more than me in the car! Long story short, I found that the defroster door on the left side of the plenum chamber is broken(so half of the airflow goes to the floor and half to the defrost. Not the clip(connecting the vacuum powered actuator rod to the shaft of the defrost door) like most people, but the shaft. Does anyone know how to remove my dash so I can get to the plenum chamber? I believe I need to remove the WHOLE dash. Right now I have the instrument cluster out as well as the radio and the radio bezel. I am not sure what my next move it. Please help, Thank You in advance!!!
I could reach the clip on the actuator, here is is broken right on the shaft.
Here is the actuator location I am talking about. To the left and just behind the radio(removed) shown below:
I could reach the clip on the actuator, here is is broken right on the shaft.
Here is the actuator location I am talking about. To the left and just behind the radio(removed) shown below: