Dome Light Install for 2022 PIU | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Dome Light Install for 2022 PIU

TylerDurden21

New Member
Joined
January 4, 2022
Messages
9
Reaction score
10
City, State
Boca Raton
Year, Model & Trim Level
2022 Ford Interceptor
Callsign
AWACK
I have the 2022 Ford Police Interceptor Utility.
Unfortunately the vehicle was not outfitted with a dome light.

I would like to install the following dome light: ECVDMLTALDC


I dont have a wiring diagram for the vehicle and Im not sure where the

wiring connection is for a dome light.

Does anyone have any experience with installing dome light?
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





I see that the home page has a button for Contact Support. Did you try using that?

Peter
 






I have the 2022 Ford Police Interceptor Utility.
Unfortunately the vehicle was not outfitted with a dome light.

I would like to install the following dome light: ECVDMLTALDC


I dont have a wiring diagram for the vehicle and Im not sure where the

wiring connection is for a dome light.

Does anyone have any experience with installing dome light?
In the overhead console there is a 16 pin connector. I always use pin 10 for power and pin 6 for ground. Then I use forscan to remove the theater dimming mode the factory courtesy lamps use. If you PIU didn’t come with the dome light then the 2 pin connector isn’t there. At least from what I’ve seen from all the builds I’ve done.

40774E38-EC00-4946-912D-654B882AD860.jpeg
 






I see that the home page has a button for Contact Support. Did you try using that?

Peter
I did email dana safety supply since there is one in south Florida.

Of course the holiday has slowed everything down!

I will ask the manufacturer if they can't provide any aid as well, usually it's an outfitter issue.
 






In the overhead console there is a 16 pin connector. I always use pin 10 for power and pin 6 for ground. Then I use forscan to remove the theater dimming mode the factory courtesy lamps use. If you PIU didn’t come with the dome light then the 2 pin connector isn’t there. At least from what I’ve seen from all the builds I’ve done.

View attachment 436555
I appreciate your time and information, I will see what I can find on my 2022 PIU.
If Pin #2 isn't there i'll have to ask an outfitter for assistance.

Thank you again,

Bill G
 






Any update on the subject? I’m looking to do the same form my 2020 Ford PIU
 






Any update on the subject? I’m looking to do the same form my 2020 Ford PIU
The member may no longer be around. He was last seen here over a year ago on Jan. 3, 2023

Peter
 






Back
Top