EGR reset location? | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

EGR reset location?

not turbo

Well-Known Member
Joined
July 29, 2006
Messages
111
Reaction score
0
City, State
Everett WA
Year, Model & Trim Level
87 Bronco 2
Does anyone know where the reset is for the emissions light? The Chiltons says it's in the "upper right corner of the glove box...marked "reset"" but I don't see it when I open the glove box.

(FYI it's an '87 B2, 2.9 w/auto, 100% stock)
 






Found it...if you open the glove box, and look straight up at the upper right corner, you'll see a small (~1 1/2" x 2") plastic box with a couple of wires going to it. In the corner of the box will be either a 3/16" hole, or a sticker covering the hole.

Inside the hold is a little push button that resets the light. I didn't see "reset" marked anywhere.

I had to take off the glove box door to access it (easy to do: two screws and it comes off).

(BTW, the light comes on when either a fault is detected, or when 2000 hours of "engine run time" has accumulated--about 60k miles)

Light is out, tester doesn't show any more codes, all is good.

:)
 






Back
Top