Favio Rescia
New Member
- Joined
- August 7, 2014
- Messages
- 4
- Reaction score
- 1
- City, State
- Buenos Aires
- Year, Model & Trim Level
- ford explorer 1995
Hi All!
My name is Favio Rescia. I live in Argentina and this is my first time within the forum. I am the owner of a 1994 Explorer XLT 4.0 OHV 4x4, with more than 450000 km (close to 280000 miles) run. Now I am suffering a problem never had before that I would like to explain to receve suggestions of the actions to take. Running normally the truck in the city, when I reached a corner and had to slw down, the engine stopped. I started it again and for one hour nothing more happened. I parked and when I run it again, I did two blocks, sow down in a corner again and the engine stopped. Started again and the same happened the next street. Then Intried again but since that moment the engine never cranked again. I made some checkings as follows: when starting no fuel pump priming noise, no fuel pressure, no sparks. No fuses burn but no power getting into the relays that control fuel pump or the PCM neither. So I guess this is the reason why I cannot get sparks or the fuel pump work. I wonder if it could be the power feed to the PCM or the module itself. What do you suggest? If the module is not damaged, why could appear a lack of power to feed it? A ground problem? But where? Thanks a lot in advance!!
My name is Favio Rescia. I live in Argentina and this is my first time within the forum. I am the owner of a 1994 Explorer XLT 4.0 OHV 4x4, with more than 450000 km (close to 280000 miles) run. Now I am suffering a problem never had before that I would like to explain to receve suggestions of the actions to take. Running normally the truck in the city, when I reached a corner and had to slw down, the engine stopped. I started it again and for one hour nothing more happened. I parked and when I run it again, I did two blocks, sow down in a corner again and the engine stopped. Started again and the same happened the next street. Then Intried again but since that moment the engine never cranked again. I made some checkings as follows: when starting no fuel pump priming noise, no fuel pressure, no sparks. No fuses burn but no power getting into the relays that control fuel pump or the PCM neither. So I guess this is the reason why I cannot get sparks or the fuel pump work. I wonder if it could be the power feed to the PCM or the module itself. What do you suggest? If the module is not damaged, why could appear a lack of power to feed it? A ground problem? But where? Thanks a lot in advance!!