sureshot40sw
Well-Known Member
- Joined
- November 21, 2003
- Messages
- 162
- Reaction score
- 0
- City, State
- L.A. -- Lower Arkansas
- Year, Model & Trim Level
- '94 SAS sport
I ordered these from greatlakeoffroad.com awhile back and took forever to decide on what wheels to use... I decided on some Bart IMCA wheels cuz they are cheap, strong and have a large valve stem that points to the center intead of the outside... no way to knock this one off....
the wheels are 15x8 with a 3" backspace... they measure out at 9" wide with the locks....
it only took two half days to get em built... it took longer for the paint to dry....
and if anbody interested, I can build another set... (different pattern of course )
valve stem hole
inner ring welded on
FINALLY on the ground
the wheels are 15x8 with a 3" backspace... they measure out at 9" wide with the locks....
it only took two half days to get em built... it took longer for the paint to dry....
and if anbody interested, I can build another set... (different pattern of course )
valve stem hole
inner ring welded on
FINALLY on the ground