Ford Racing Intake Manifold & Throttle Body

[Destyn2001]

OK it's that time again for another compatability question from me...

Been very busy putting an upgrade list & plan together, and need to know if both of the linked below parts are compatable with my 2010 4.6L STA. And if the Manifold is, will it be compatable w/ the Ford Racing Valve Covers?

Before it is said, I know the Zabtek TBA is compatible for the Explorer 4.6L 3V but would like to keep it w/ the Ford Racing Family as much as possible...

Been scouring Mustang shopping lists and forums to see exactly what is compatible. So then I can pick my mods carefully... been putting everything off until the warranty is up and it's almost gonnzo... time to break something on it now...

Thanks again...

http://www.cjponyparts.com/ford-rac...ign=shopping&gclid=CMOSstKxp8ECFdRaMgodKAwArw

http://www.cjponyparts.com/ford-racing-throttle-body-gt-2005-2009/p/TB99/

 

[Merc08]

To make it work you'll need better flowings heads and possibly cams. Just for comparison, when I added the mustang intake, ported the twin throttle body, motion delete plates, UDP's, electric fan, a mustang 4" CAI and a breenspeed tune, it feels a little faster but not cosmic like the same mods I did to my 05 Mustang GT. I know for mine, the awd and about 1100lbls extra than my 05 Mustang GT kills the performance.
and since the FRPP intake flows more and then the TB, your heads will take so much and that's about it. Once you get some ported heads, the extra air flow from that intake will yield better results. And since the intake has the incorporated delete plates, tune is a must.