These are the only modules that come up. Could the adapter i'm using be an issue?
The one i'm using has a toggle switch for HS-CAN and MS-CAN. on MS-CAN i only get errors when trying to connect. HS_CAN is what i use to read.
Interface:
Type: FTDI #1:12345678, 500000 bps
Adapter: ELM327 v1.4
Min.delay: 4 ms ( Excellent)
Errors: None
Vehicle:
Model: Ford Explorer
Engine: EcoBoost Gasoline Turbocharged Direct Injection
Capacity: 3.5L
Year: 2017
Generation: 2017 MY
Fuel: Gasoline
Transmission gear: Automatic
PCM - Powertrain Control Module
Part number: GB5A-12A650-JA
Calibration level: GB5A-12A650-JA
Strategy : t
Hardware type: GB5A-12B684-HA
Total Distance: 135678.0 km
OBDII - On Board Diagnostic II
APIM - Accessory Protocol Interface Module
Part number: FR3T-14D212-RA
Calibration level: HM5T-14D212-AA
Strategy : E1BT-14D205-AJ
PAM - Parking Aid Module
Part number: FU5T-15K866-BJ
Calibration level: FU5T-15K866-BJ (latest known: FU5T-15K866-BL)
Strategy : FU5T-14C090-BJ
BdyCM - Body Control Module
Part number: HU5T-14B476-BAJ
Calibration level: HU5T-14B476-BAJ (latest known: HU5T-14B476-BAR)
Strategy : HU5T-14C184-AAJ
BECMB - Battery Energy Control Module B
Part number: HU5T-14G490-AF
Calibration level: HU5T-14G490-AF
Strategy : HU5T-14G499-AE
