MEANEXPLODER
Well-Known Member
- Joined
- April 3, 2006
- Messages
- 102
- Reaction score
- 1
- City, State
- HADDAM, CT
- Year, Model & Trim Level
- 91 XLT
i have 12.6 @ battery
i have 12.6 on both sides of 30a fuel relay fuse
i hear fuel pump relay "clicking"
i have 6.6 coming into the inertia switch
i have 6.6 coming to the fuel pump plug down by the tank
no fuel pump "hum"
is this a bad fuel pump or is my voltage at the pump too low?
i assumed that with the key first turned to run that it would send a higher voltage to the fuel pump plug for at least a few seconds but it stays right at 6.6
any help greatly appreciated
i have 12.6 on both sides of 30a fuel relay fuse
i hear fuel pump relay "clicking"
i have 6.6 coming into the inertia switch
i have 6.6 coming to the fuel pump plug down by the tank
no fuel pump "hum"
is this a bad fuel pump or is my voltage at the pump too low?
i assumed that with the key first turned to run that it would send a higher voltage to the fuel pump plug for at least a few seconds but it stays right at 6.6
any help greatly appreciated