Getting 6 Codes, advice needed. | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Getting 6 Codes, advice needed.

idriveasporttrac

New Member
Joined
September 26, 2007
Messages
1
Reaction score
0
Ok my wifes 2001 Job 2 sporttrac threw 3 codes last week( p0174,p0020, and p0004), I cleared them drove about 400 miles over 3-4 days and now I've got:

p0171 B1 too lean
p0174 B2 too lean
p0010 Camshaft Posistion actuarator B1
p0020 Camshart Posistion Actu.... B2
p0004 Fuel Volume Regularr control circuit

and my favorite
p0000 no failure.

Is there a common failure on the 4.0 (ohc I believe) motors that I need to be looking at? Is this as simple as getting 2 camshaft sensors? Or is there something else I should be looking at. The truck has 71000 miles and hasn't given us much trouble. From what she says, it's had one or 2 spots where its been a little hard to start, but otherwise no noticable weirdness other then the codes.

Any advice is appreciated.

John
 






Back
Top