Krebs21
Member
- Joined
- January 19, 2013
- Messages
- 20
- Reaction score
- 5
- City, State
- vacaville, Ca
- Year, Model & Trim Level
- 1992 Ford Explorer
Hey everybody,
Thanks to this awesome site, and the great information and how to's I've found, in a few days I'll be replacing the radius arm bushings on my 92' Eddie bauer. Which is not only a huge step into the world of dyi for me but a very exiting one as well. It seems that a previous owner had already replaced the bushings because there are already bolts where the factory rivets would be located and no heat shield on the passenger side ( Which I think is why it looks like pancake ). What I'm concerned about are if the current bolts are Grade 8. Is there a way of finding out, or should they be replaced to be on the safe side, regardless? TM
Thanks to this awesome site, and the great information and how to's I've found, in a few days I'll be replacing the radius arm bushings on my 92' Eddie bauer. Which is not only a huge step into the world of dyi for me but a very exiting one as well. It seems that a previous owner had already replaced the bushings because there are already bolts where the factory rivets would be located and no heat shield on the passenger side ( Which I think is why it looks like pancake ). What I'm concerned about are if the current bolts are Grade 8. Is there a way of finding out, or should they be replaced to be on the safe side, regardless? TM