Diveshard
Well-Known Member
- Joined
- October 9, 2018
- Messages
- 113
- Reaction score
- 5
- Location
- Gatineau, Quebec
- City, State
- Gatineau, QC, Canada
- Year, Model & Trim Level
- 2016 Explorer XLT V6
Hi everyone.
Yesterday when starting my car a check engine came on and read it with my blue driver odb reader this is what I got.
1. B115E-08
Video Encoder Bus Signal Erratic Message Failures: Bus Signal / Message Failure
I cleared the code thinking this was some sort of misfire but this morning trying to remote start my car there was no juice in my battery. I boosted the car and ran another scan and now have all these codes. I suspect my battery will be dead in the morning. Anyone experience this situation? thanks, Fred
----Pending Trouble Codes Scan Report----
1 Pending Trouble Codes Trouble Codes:
1. P06B8
Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error
----Generic Electronic Module Codes Scan Report----
2 Generic Electronic Module Trouble Codes:
1. B115E-08
Video Encoder Bus Signal Erratic Message Failures: Bus Signal / Message Failure
2. B1438-03
Wiper select switch circuit failure: FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failure
----Accessory Protocol Interface Module Codes Scan Report----
1 Accessory Protocol Interface Module Trouble Codes:
1. U3003-16
Battery Voltage: Circuit Voltage Below Threshold
----Powertrain Control Module Codes Scan Report----
1 Powertrain Control Module Trouble Codes:
1. P06B8-00
Yesterday when starting my car a check engine came on and read it with my blue driver odb reader this is what I got.
1. B115E-08
Video Encoder Bus Signal Erratic Message Failures: Bus Signal / Message Failure
I cleared the code thinking this was some sort of misfire but this morning trying to remote start my car there was no juice in my battery. I boosted the car and ran another scan and now have all these codes. I suspect my battery will be dead in the morning. Anyone experience this situation? thanks, Fred
----Pending Trouble Codes Scan Report----
1 Pending Trouble Codes Trouble Codes:
1. P06B8
Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error
----Generic Electronic Module Codes Scan Report----
2 Generic Electronic Module Trouble Codes:
1. B115E-08
Video Encoder Bus Signal Erratic Message Failures: Bus Signal / Message Failure
2. B1438-03
Wiper select switch circuit failure: FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failure
----Accessory Protocol Interface Module Codes Scan Report----
1 Accessory Protocol Interface Module Trouble Codes:
1. U3003-16
Battery Voltage: Circuit Voltage Below Threshold
----Powertrain Control Module Codes Scan Report----
1 Powertrain Control Module Trouble Codes:
1. P06B8-00