Intake and Head gasket sets to use ?? | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Intake and Head gasket sets to use ??

sunrse777

Member
Joined
February 13, 2007
Messages
47
Reaction score
0
City, State
New York
Year, Model & Trim Level
'91 XLT Supercab 4X4
I am pulling the heads off a '93 4.0L. Want to know which gasket sets, from which manufacturers, you have used and would recommend. And where did you buy them, especially if that was online... ... Thanks.... :usa:
 






Fel-Pro gaskets

Felpro has two types of head gaskets...... pn 9724PT1 and 9725PT1 or
9724PT2 and 9725PT2 .... the PT2 ones are a newer design .... Has anyone had any experience with either of these ? Just wondering if it's worth the extra $$$ to buy these newer ones and then have to buy the intake and exhaust separately... the new head gaskets do not come in the standard FelPro valve job gasket set ... Thanks:salute:
 






I just completed a head gasket job on my 99 4.0 OHV Ranger...use the new design..Felpro is always improving on problems..The difference in my set was a 2 piece lower intake to prevent lifting and better valve seals...I bought mine local at NAPA
 






Back
Top